RSPro Surfboard HexaTraction Black Edition – 1 Standard Kit – 20 pieces

£29.99

3 in stock

Want it tomorrow order in the next
Select Next Day Shipping at checkout

The real HexaTraction™️ in Black. Often imitated, never duplicated.

Mix it with a clear HexaTraction Basic Kit for more potential patterns.

  • Temperature independent grip and traction alternative to wax and pads
  • Light, thin, and doesn’t absorb water
  • No melting, no hassle, no residues, no contamination
  • Super-bmodular configuration
  • Clear, translucent, so it doesn’t cover your board graphics
  • Works on everything: epoxy, polyester and soft boards
  • UV protection and waterproofing for your board deck
  • Automotive, RSPro® quality
  • Standard kit weight: 115 grams

RS PRO Full Range


How much do you need?

The Standard kit (box) is composed by 18 full hexagons and 4 half hexagons of 16cm (6.3″) and a HexaTraction star shaped installation template.

  • Surf shortboard: 1 standard kit recommended
  • Fun boards and Long boards under 8ft: 2 standard kits recommended
  • Fun boards and Long boards over 8ft: 3 standard kits recommended
  • River, wake and kite surfing boards: 1 basic kit recommended
  • SUP nose: 1 standard kit recommended
  • SUP full deck: 2-3 standard kits recommended

Fitting Instructions

  1. Don’t install it on a cold environment. We recommend to install it at room temperature. Below 20ºC (68F) the material and glue tend to get rigid, so it would make the installation more difficult.
  2. Throughly clean the area with alcohol or similar. Make sure no rest of wax is present. Avoid industrial cleaners.
  3. Before starting, layout the HexaTraction hexagons choosing the best pattern to cover the area where you need grip and traction.
  4. PRO TIP: Peel exactly half of the adhesive backing of the first HexaTraction hexagon, so it will be super easy to align with the board center line.
  5. Pour or spray water. It will help on having no air bubbles.
  6. Stick half of the hexagon making sure to remove all air and water out by rubbing with your fingers and/or cloth. Remove the other half of the backing and squeeze all the air and water out.
  7. PRO TIP: Squeeze from the center to the edges or from one side to the opposite so all air and water gets out.
  8. Using the HexaTraction installation template included in the packaging, progress through the deck one hexagon at a time.
  9. PRO TIP: Align by the side of the hexagon with the adhesive backing on.
  10. Complete the layout using the half hexagons if needed.
  11. You’re done. Review all hexagons, making sure all the water is out, let it dry (not on the sun) and let it cure for some hours before heading to the water.

HexaTraction RSPro® board grip&traction uses a strong adhesive. If you need to remove it, we advice to use a hair dryer or heatgun to apply some gentle heat so the adhesive softens, and removal is easier. Specially if your board is painted or coated.

Additional information

Weight.3 kg
Dimensions10 × 10 × 10 cm
Brand

RSPro

EAN

0799040029668

MPN

0799040029668

Reviews

There are no reviews yet.

Be the first to review “RSPro Surfboard HexaTraction Black Edition – 1 Standard Kit – 20 pieces”

Your email address will not be published. Required fields are marked *